Product Details & Technical Specifications
The Siemens QAF64.2-J is an electro-mechanical frost protection detector engineered to safeguard hydronic air handling units and heat exchangers from freeze damage. Utilizing a 2000 mm responsive capillary sensing element with a 250 mm minimum active length, it combines a modulating DC 0...10 V proportional output for pre-emptive heating valve positioning with an SPDT safety trip relay (rated up to AC 250 V, 6 A) for rapid equipment shutdown. Operating on an AC 24 V supply, the device actively counteracts stratified air conditions to protect coils before structural rupture occurs.
- Air handling unit (AHU) water-to-air heating coils and pre-heater banks prone to freezing intake air.
- Make-up air units (MAUs) and 100% outside air ventilation plants operating in sub-zero ambient climates.
- Heat recovery run-around loops and mixed-air plenums requiring local coil-face freeze protection.
- Dual-Action Control: Combines a modulating DC 0...10 V P-controller output to proportionally open heating valves with a potential-free SPDT limit switch (AC 250 V, 6 A) for safety interlocks.
- High-Sensitivity Sensing: Continuous 2000 mm capillary responds whenever any localized 250 mm section falls below the adjustable 0...15 °C setpoint.
- Field Diagnostics & Reset: Integrated test switch enables fast functional simulation during commissioning, complemented by a red frost LED and a field-configurable manual or automatic reset selector.
- Standard BMS Integration: Operates on standard AC 24 V power with a 6-wire connection interface, supporting both stand-alone safety loops and centralized DDC inputs.
Compatibility & Installation: Installs to AHU exterior casings using sheet metal fasteners, with the 2000 mm capillary woven across the downstream face of the coil using capillary support clips. The 6-wire terminal block integrates directly with standard AC 24 V building automation panels and safety circuit hardwiring.
Product Identification
- Brand: Siemens
- Product No. (ASN): QAF64.2-J
- Stock No. (SSN): S55700-P155
- GTIN / EAN: 7612914098320
- Warranty: 24 Months
Commercial & Logistics Details
- List Price (MSRP): €264.00
- Price: €184.80
- Net Weight: 0.359 kg (359 g)
- Country of Origin: Germany (DE)
- Customs HS Code: 90321020
- Minimum Order Qty (MOQ): 1 pc(s)
- Sales Status: Saleable Product
Technical Specifications
| Operating voltage | AC 24 V |
| Power consumption | 6.6 VA |
| Min. active length | 250 mm |
| Setpoint setting range | 0...15 °C |
| Capillary length | 2000 mm |
| Measuring range, temperature | 0...15 °C |
| Ambient temperature, operation | -15...55 °C |
| Connection cable | 6-wire |
| Digital output, switching voltage | AC 5...250 V; 5 V |
| Digital output, switching current | 6 (4)A |
| Analog inputs | Control input |
| Analog output, signal | DC 0...10 V |
| Digital outputs | CO: 1 , Potential-free |
| Degree of protection | IP42 |
| Dimensions (W x H x D) | 96 x 136 x 67 mm |
Downloads & Technical Documentation
Siemens HIT Official Portal ↗-
PDFView on Siemens HIT ↗Datasheet: Frost detectors QAF64..-J
-
PDFView on Siemens HIT ↗Declaration of conformity: EU Declaration of Conformity QAF64.x-J & TFL611..
-
PDFView on Siemens HIT ↗Declaration of conformity: UK Declaration of Conformity QAF64
-
PDFView on Siemens HIT ↗Environmental Documents: QAF6.. thermostats
-
EXTERNALView on Siemens HIT ↗CAD and BIM product data (PartCommunity): European portfolio: click here for further information
-
EXTERNALView on Siemens HIT ↗CAD and BIM product data (PartCommunity): Asia/Pacific portfolio: click here for further information
-
PDFView on Siemens HIT ↗Operating Instructions: General instructions Frost Sensor QAF64..J
